Affichage hiérarchique

Le dom · 02-17-2026, 06:45 PM

D'accord, il n'y a donc qu'une carte Ethernet.
Et où est connectée cette carte Ethernet?

Facel · (Modification du message : 02-17-2026, 07:02 PM par Facel.)

C'est le port ethernet du RPI4, ilest connecté directement sur mon switch
Je comptais utiliser mon adaptateur USB/Ethernet dans un 2eme temps après validation du bon fonctionnement.
Avec un Host Windows Asio la target connectée via switch fonctionne

Le dom · 02-17-2026, 10:15 PM

OK, peux-tu me montrer le contenu du fichier diretta-renderer.conf qui se trouve dans /opt/diretta-renderer-upnp/ ?

Ainsi que le log debug en activant l’option verbose.

Facel · 02-17-2026, 11:58 PM

Log debug

Code :
Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: ════════════════════════════════════════════════════════

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]:  Starting Diretta UPnP Renderer

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: ════════════════════════════════════════════════════════

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: Configuration:

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]:  Target:          1

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]:  Network Interface: auto-detect

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: Command:

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]:  /opt/diretta-renderer-upnp/DirettaRendererUPnP --target 1 --port 4005

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: ════════════════════════════════════════════════════════

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.312] [DirettaRenderer] No Diretta Target found!

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.312] [DirettaRenderer] Run: ./bin/DirettaRendererUPnP --list-targets

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.312] Failed to start renderer

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.219] ═══════════════════════════════════════════════════════

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.219]  Diretta UPnP Renderer v2.0.3

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.219] ═══════════════════════════════════════════════════════

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.219] Configuration:

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.219]  Name:    Diretta Renderer

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.219]  Port:    4005

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.219]  Gapless:  enabled

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.220]  UUID:    diretta-renderer-45f2ec469457c66b

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.220] Starting renderer...

Feb 17 18:38:58 RPI-DirettaUPnP diretta-renderer[8063]: [18:38:58.220] [DirettaRenderer] Checking Diretta Target...

Feb 17 18:38:58 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Main process exited, code=exited, status=1/FAILURE

Feb 17 18:38:58 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Failed with result 'exit-code'.

Feb 17 18:39:03 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Scheduled restart job, restart counter is at 3001.

Feb 17 18:39:03 RPI-DirettaUPnP systemd[1]: Started diretta-renderer.service - Diretta UPnP Renderer.

fichier diretta-renderer.conf

Code :
# Diretta UPnP Renderer Configuration

#

# This file is sourced by the systemd service unit.

# Modify these values to change renderer behavior.

#

# After changing values, reload:

#  sudo systemctl daemon-reload

#  sudo systemctl restart diretta-renderer

# ============================================================================

# BASIC SETTINGS

# ============================================================================

# Target Diretta device number (1 = first found)

TARGET=1

#TARGET_IP=192.168.1.25

# UPnP port (default: 4005)

PORT=4005

# Gapless playback

# Add "--no-gapless" to disable, leave empty to enable

GAPLESS=""

# Verbose logging

# Add "--verbose" to enable debug logs, leave empty for normal output

VERBOSE=""

# ============================================================================

# NETWORK INTERFACE SETTINGS (for multi-homed systems)

# ============================================================================

#

# For systems with multiple network interfaces (e.g., 3-tier architecture),

# specify which interface to use for UPnP discovery and SSDP broadcasts.

#

# This is essential for proper operation when you have:

#  - Multiple network cards (eth0, eth1, eno1, eno2, etc.)

#  - VPN connections

#  - Bridged networks

#  - Separate control and audio networks

#

# IMPORTANT: Choose the interface connected to your UPnP control points

#            (e.g., JPlay, Roon, BubbleUPnP), NOT the Diretta audio network!

#

# Examples:

#  NETWORK_INTERFACE="eth0"          # Use interface name (recommended)

#  NETWORK_INTERFACE="192.168.1.10"  # Use specific IP address

#  NETWORK_INTERFACE=""              # Auto-detect (default)

#

# Common scenarios:

#

#  Single network (default):

#    NETWORK_INTERFACE=""

#

#  3-tier architecture (recommended by dsnyder):

#    Control Points: 192.168.1.x on eth0

#    Host:          192.168.1.10 (eth0) + 192.168.2.10 (eth1)

#    Diretta DAC:  192.168.2.100 on eth1

#

#    Use: NETWORK_INTERFACE="eth0"

#          TARGET should point to 192.168.2.100

#

#  VPN + Local network:

#    Local:  192.168.1.x on eth0

#    VPN:    10.0.0.x on tun0

#

#    Use: NETWORK_INTERFACE="eth0" (for local control points)

#

# To list your network interfaces:

#  ip link show

#  ip addr show

#

# Modification Copilot = indiquer le nom de l'interface :eth0

NETWORK_INTERFACE=""

#NETWORK_INTERFACE="eth0"

# ============================================================================

# ADVANCED DIRETTA SDK SETTINGS

# ============================================================================

# Leave commented to use defaults. Uncomment and modify to override.

# Thread Mode (bitmask - add values together)

# Default: 1 (Critical only)

#

# Available flags:

#  1    = Critical (REALTIME priority)

#  2    = NoShortSleep

#  4    = NoSleep4Core

#  8    = SocketNoBlock

#  16    = OccupiedCPU

#  32    = FEEDBACK (moving average)

#  64    = FEEDBACK (moving average)

#  128  = FEEDBACK (moving average)

#  256  = NOFASTFEEDBACK

#  512  = IDLEONE

#  1024  = IDLEALL

#  2048  = NOSLEEPFORCE

#  4096  = LIMITRESEND

#  8192  = NOJUMBOFRAME

#  16384 = NOFIREWALL

#  32768 = NORAWSOCKET

#

# Examples:

#  1    = Default (Critical only)

#  17    = Critical + OccupiedCPU (1+16)

#  33    = Critical + FEEDBACK32 (1+32)

#

#THREAD_MODE=1

# Transfer Packet Cycle Maximum Time (microseconds)

# Default: 10000 (10ms)

# Range: 333-10000

#CYCLE_TIME=10000

# Transfer Packet Cycle Minimum Time (microseconds)

# Only used in random mode

# Default: 333

#CYCLE_MIN_TIME=333

# Information Packet Cycle Time (microseconds)

# Default: 5000 (5ms)

#INFO_CYCLE=5000

# MTU Override (bytes)

# Default: auto-detect

# Common values: 1500 (standard), 9000 (jumbo), 16128 (max jumbo)

#MTU_OVERRIDE=""

# ============================================================================

# TROUBLESHOOTING

# ============================================================================

#

#

# Problem: Renderer not discovered by control points in 3-tier setup

# Solution: Set NETWORK_INTERFACE to the interface with control points

#          Example: NETWORK_INTERFACE="eth0"

#

# Problem: How to find which interface to use?

# Solution: Run: ip addr show

#          Look for the IP on the same subnet as your control points

#

# Problem: Renderer discovered but no audio

# Solution: Check TARGET points to correct Diretta DAC IP on audio network

#

# For more help: https://github.com/cometdom/DirettaRendererUPnP/issues

Le dom · Hier, 01:09 PM

Le fichier diretta-renderer.conf a été modifié, pourquoi?

#TARGET_IP=192.168.1.25 cette option n'existe pas même si elle est commentée, je ne comprends pas pourquoi elle apparait. A supprimer

#NETWORK_INTERFACE="eth0"
Cette option est commentée et normalement NETWORK_INTERFACE n'est indiqué qu'une fois.
Supprime cette ligne et sur la ligne au-dessus, rajoute eth0.

# Modification Copilot = indiquer le nom de l'interface :eth0

Qu'est-ce que copilot vient faire dans le ficher de configuration?

NETWORK_INTERFACE="eth0"

Remplace le contenu de diretta-renderer.conf par celui-ci dessous afin de remettre de l'ordre dans ce fichier qui a apparemment été modifié.

Code :
# Diretta UPnP Renderer Configuration

# 

# This file is sourced by the systemd service unit.

# Modify these values to change renderer behavior.

#

# After changing values, reload:

#  sudo systemctl daemon-reload

#  sudo systemctl restart diretta-renderer

# ============================================================================

# BASIC SETTINGS

# ============================================================================

# Target Diretta device number (1 = first found)

TARGET=1

# UPnP port (default: 4005)

PORT=4005

# Gapless playback

# Add "--no-gapless" to disable, leave empty to enable

GAPLESS=""

# Log verbosity

# Options:

#  ""          - Normal output (INFO level, default)

#  "--verbose" - Debug logs (all messages)

#  "--quiet"  - Warnings and errors only

VERBOSE="--verbose"

# ============================================================================

# NETWORK INTERFACE SETTINGS (for multi-homed systems)

# ============================================================================

# 

# For systems with multiple network interfaces (e.g., 3-tier architecture),

# specify which interface to use for UPnP discovery and SSDP broadcasts.

#

# This is essential for proper operation when you have:

#  - Multiple network cards (eth0, eth1, eno1, eno2, etc.)

#  - VPN connections

#  - Bridged networks

#  - Separate control and audio networks

#

# IMPORTANT: Choose the interface connected to your UPnP control points

#            (e.g., JPlay, Roon, BubbleUPnP), NOT the Diretta audio network!

#

# Examples:

#  NETWORK_INTERFACE="eth0"          # Use interface name (recommended)

#  NETWORK_INTERFACE="192.168.1.10"  # Use specific IP address

#  NETWORK_INTERFACE=""              # Auto-detect (default)

#

# Common scenarios:

#

#  Single network (default):

#    NETWORK_INTERFACE=""

#

#  3-tier architecture (recommended by dsnyder):

#    Control Points: 192.168.1.x on eth0

#    Host:          192.168.1.10 (eth0) + 192.168.2.10 (eth1)

#    Diretta DAC:  192.168.2.100 on eth1

#    

#    Use: NETWORK_INTERFACE="eth0"

#          TARGET should point to 192.168.2.100

#

#  VPN + Local network:

#    Local:  192.168.1.x on eth0

#    VPN:    10.0.0.x on tun0

#    

#    Use: NETWORK_INTERFACE="eth0" (for local control points)

#

# To list your network interfaces:

#  ip link show

#  ip addr show

#

NETWORK_INTERFACE="eth0"

# ============================================================================

# ADVANCED DIRETTA SDK SETTINGS

# ============================================================================

# Leave commented to use defaults. Uncomment and modify to override.

# Thread Mode (bitmask - add values together)

# Default: 1 (Critical only)

# 

# Available flags:

#  1    = Critical (REALTIME priority)

#  2    = NoShortSleep

#  4    = NoSleep4Core

#  8    = SocketNoBlock

#  16    = OccupiedCPU

#  32    = FEEDBACK (moving average)

#  64    = FEEDBACK (moving average)

#  128  = FEEDBACK (moving average)

#  256  = NOFASTFEEDBACK

#  512  = IDLEONE

#  1024  = IDLEALL

#  2048  = NOSLEEPFORCE

#  4096  = LIMITRESEND

#  8192  = NOJUMBOFRAME

#  16384 = NOFIREWALL

#  32768 = NORAWSOCKET

#

# Examples:

#  1    = Default (Critical only)

#  17    = Critical + OccupiedCPU (1+16)

#  33    = Critical + FEEDBACK32 (1+32)

#

#THREAD_MODE=1

# Transfer Packet Cycle Maximum Time (microseconds)

# Default: 10000 (10ms)

# Range: 333-10000

#CYCLE_TIME=10000

# Transfer Packet Cycle Minimum Time (microseconds)

# Only used in random mode

# Default: 333

#CYCLE_MIN_TIME=333

# Information Packet Cycle Time (microseconds)

# Default: 5000 (5ms)

#INFO_CYCLE=5000

# MTU Override (bytes)

# Default: auto-detect

# Common values: 1500 (standard), 9000 (jumbo), 16128 (max jumbo)

#MTU_OVERRIDE=""

# ============================================================================

# TROUBLESHOOTING

# ============================================================================

#

# Problem: Renderer not discovered by control points in 3-tier setup

# Solution: Set NETWORK_INTERFACE to the interface with control points

#          Example: NETWORK_INTERFACE="eth0"

#

# Problem: How to find which interface to use?

# Solution: Run: ip addr show

#          Look for the IP on the same subnet as your control points

#

# Problem: Renderer discovered but no audio

# Solution: Check TARGET points to correct Diretta DAC IP on audio network

#

# For more help: https://github.com/cometdom/DirettaRendererUPnP/issues

J'ai activé le mode --verbose afin d'avoir un log de debug complet. Peut-être y verrai-je quelque chose de plus parlant?

Donne-moi ensuite le log si ça ne fonctionne toujours pas.

Facel · (Modification du message : Aujourd’hui, 09:23 AM par Facel.)

Bonsoir

J'ai cette erreur "target not found" depuis le tout début, j'ai donc essayé diverses modifications dans la fichier diretta-renderer.conf ... notamment en forçant les adresses IP ... et comme il était tard le nettoyage n'a pas été parfait Dodgy

J'ai remis le fichier diretta-renderer.conf d'origine ...puis reboot ...target not found

Code :
Feb 18 21:19:38 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Failed with result 'signal'.

Feb 18 21:19:43 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Scheduled restart job, restart counter is at 57.

Feb 18 21:19:43 RPI-DirettaUPnP systemd[1]: Started diretta-renderer.service - Diretta UPnP Renderer.

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: Binding to network interface: eth0

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: ════════════════════════════════════════════════════════

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]:  Starting Diretta UPnP Renderer

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: ════════════════════════════════════════════════════════

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: Configuration:

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]:  Target:          1

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]:  Network Interface: eth0

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: Command:

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]:  /opt/diretta-renderer-upnp/DirettaRendererUPnP --target 1 --port 4005 --interface eth0 --verbose

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: ════════════════════════════════════════════════════════

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: [21:19:43.469] [DirettaRenderer] No Diretta Target found!

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: [21:19:43.469] [DirettaRenderer] Run: ./bin/DirettaRendererUPnP --list-targets

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: [21:19:43.470] Failed to start renderer

Feb 18 21:19:43 RPI-DirettaUPnP diretta-renderer[1934]: terminate called without an active exception

Feb 18 21:19:43 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Main process exited, code=killed, status=6/ABRT

Feb 18 21:19:43 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Failed with result 'signal'.

Feb 18 21:19:48 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Scheduled restart job, restart counter is at 58.

Feb 18 21:19:48 RPI-DirettaUPnP systemd[1]: Started diretta-renderer.service - Diretta UPnP Renderer.

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: Binding to network interface: eth0

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: ════════════════════════════════════════════════════════

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]:  Starting Diretta UPnP Renderer

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: ════════════════════════════════════════════════════════

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: Configuration:

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]:  Target:          1

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]:  Network Interface: eth0

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: Command:

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]:  /opt/diretta-renderer-upnp/DirettaRendererUPnP --target 1 --port 4005 --interface eth0 --verbose

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: ════════════════════════════════════════════════════════

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: [21:19:48.989] [DirettaRenderer] No Diretta Target found!

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: [21:19:48.989] [DirettaRenderer] Run: ./bin/DirettaRendererUPnP --list-targets

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: [21:19:48.989] Failed to start renderer

Feb 18 21:19:48 RPI-DirettaUPnP diretta-renderer[1943]: terminate called without an active exception

Feb 18 21:19:48 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Main process exited, code=killed, status=6/ABRT

Feb 18 21:19:48 RPI-DirettaUPnP systemd[1]: diretta-renderer.service: Failed with result 'signal'.

Je pense que le problème se situe probablement au niveau de la target sur gentooplayer ...

Le dom · Il y a 8 heures

Il faudrait que je puisse voir la configuration sur place, ce qui est malheureusement imposible.
Comment la Target est-elle configurée sur GentooPlayer?
S'agit-il de la dernière version?

Janacek · Il y a 4 heures

Hello à tous

Après avoir repris le target j'ai fait des tests
AS + DirettaRendererUPnP
Lyrion + SqueezeDiretta

Chez moi sont excellents et ils sont au même niveaux, je n'ai pas détecté des différences notables.

Ah les crash avec AS sont réduits (je ne sais pas à quoi est dû, mise à jours?), mais toujours un click quand on zappe les pistes. Rien de grave. Alors si on laisse joue la playlist ou l'album sans zapper, pas de clicks. Juste pour info.

Sinon avec AS, on ne peut pas laisser SqueezeDiretta activé.
En revanche l’inverse je n'ai pas eu des soucis, Lyron + SqueezeDiretta et DirettaRendererUPnP activé.

Justement GP alerte

Citation :WARNING: Audio Output Device Usage
---------------------------------
The following players/services may occupy the ALSA device and/or Diretta target:

- NetworkAudioD (NAD) (when used with HQPlayer)
- HQPlayer Embedded
- APlayer
- AP2Renderer
- Audirvana
- Squeeze2Diretta

If one of these is active, other players may fail to open the audio device.
Make sure no conflicting player/service is running.

PS: Roon + SqueezeDiretta pas des vrai tests, mais ça marche.

Le dom · Il y a 4 heures

@Janacek,
Je vais voir si je peux arranger ça.

Alaindeloin

(02-13-2026, 04:47 PM)Le dom a écrit : Ce réglage n'est plus d'actualité.
Où l'avez-vous trouvé que je le supprime de la documentation?

D'autre part avez-vous édité le fichier diretta-renderer.conf?

sudo nano /opt/diretta-renderer-upnp/diretta-renderer.conf

Si oui, envoyez-moi le log après avoir activé l'option verbose "-v" dans le fichier diretta-renderer.conf s'il vous plait.
Si vous avez déjà créé le service diretta-renderer.service

sudo journalctl -u diretta-renderer.service -f

Bonsoir, je reviens vers vous seulement ce soir, je n'ai pas pu vous répondre avant, désolé.

J'ai un target found à l'activation du renderer, puis dans la minute suivante no target found! le renderer est bien reconnu avec bubble, je peux lancer le titre, mais pas de son, le dac ne reagit pas.

Quel log dois-je vous fournir pour vous aider a comprendre?
Merci.
Alain.

Pour avancer voila quand ca fonctionne (mais c'est ephémère Big Grin

):

Code :
ist Targets: select target 2 Verbose:

[19:15:37.720] Available Diretta Targets (2 found):

[19:15:37.720] [1] TargetApp_EC9C

[19:15:37.720]    Output: FOSTEX USB AUDIO HP-A8

[19:15:37.720]    Port: IN=0 OUT=1 (multiport)

[19:15:37.720]    Version: 1

[19:15:37.720]    ProductID: 0x72506f6f746e6547

[19:15:37.720] [2] TargetApp_EC9C

[19:15:37.720]    Output: snd_allo_digione

[19:15:37.720]    Port: IN=0 OUT=2 (multiport)

[19:15:37.720]    Version: 1

[19:15:37.720]    ProductID: 0x72506f6f746e6547

[19:15:37.720] Usage:

[19:15:37.720]    Target #1: sudo ./bin/DirettaRendererUPnP --target 1

[19:15:37.720]    Target #2: sudo ./bin/DirettaRendererUPnP --target 2

[alain@fedora DirettaRendererUPnP]$ sudo ./bin/DirettaRendererUPnP --target 2 --verbose

[19:16:42.915] ═══════════════════════════════════════════════════════

[19:16:42.915]  Diretta UPnP Renderer v2.0.3

[19:16:42.915] ═══════════════════════════════════════════════════════

[19:16:42.915] Verbose mode enabled

[19:16:42.915] Configuration:

[19:16:42.915]  Name:    Diretta Renderer

[19:16:42.915]  Port:    auto

[19:16:42.915]  Gapless:  enabled

[19:16:42.915]  UUID:    diretta-renderer-eff2f3bc78693743

[19:16:42.915] [DirettaRenderer] Created

[19:16:42.915] Starting renderer...

[19:16:42.915] [DirettaRenderer] Starting...

[19:16:42.915] [DirettaRenderer] Checking Diretta Target...

[19:16:42.916] [DirettaSync] Created

[19:16:43.284] [DirettaSync] Enabling...

[19:16:43.284] [DirettaSync] Discovering Diretta target...

[19:16:43.652] [DirettaSync] Found 2 target(s)

[19:16:43.652] [DirettaSync] Selected target #2

[19:16:43.653] [DirettaSync] Measuring MTU...

[19:16:43.656] [DirettaSync] Measured MTU=1500

[19:16:43.656] [DirettaSync] Opening DIRETTA::Sync with threadMode=1

[19:16:43.657] [DirettaSync] Sink capabilities:

[19:16:43.657] [DirettaSync]  PCM: YES

[19:16:43.657] [DirettaSync]  DSD: NO

[19:16:43.657] [DirettaSync]  DSD LSB: NO

[19:16:43.657] [DirettaSync]  DSD MSB: NO

[19:16:43.657] [DirettaSync]  MS modes supported: (not reported)

[19:16:43.657] [DirettaSync]  MS mode configured: AUTO (prefers MS3 > MS1 > NONE)

[19:16:43.657] [DirettaSync] Enabled, MTU=1500

[19:16:43.658] [DirettaRenderer] Diretta Target ready

[19:16:43.660] [UPnPDevice] Created: Diretta Renderer

[19:16:43.660] [UPnPDevice] Generating ProtocolInfo...

[19:16:43.660] [UPnPDevice] ProtocolInfo: 3281 chars, 76 formats

[19:16:43.660] [AudioEngine] Created

[19:16:43.660] [UPnPDevice] Callbacks set

[19:16:43.660] [UPnPDevice] Starting...

[19:16:43.660] ? Using default interface for UPnP (auto-detect)

[19:16:43.714] ✓ UPnP initialized on 192.168.1.24:49152

[19:16:43.714] [UPnPDevice] Server started: http://192.168.1.24:49152

[19:16:43.724] [UPnPDevice] ✓ SCPD files created and webserver configured

[19:16:43.725] [UPnPDevice] ✓ Device registered (handle=1)

[19:16:43.826] [UPnPDevice] ✓ SSDP advertisements sent

[19:16:43.826] [UPnPDevice] ✓ Device is now discoverable!

[19:16:43.826] [UPnPDevice] Device URL: http://192.168.1.24:49152/description.xml

[19:16:43.826] [DirettaRenderer] UPnP: http://192.168.1.24:49152

[19:16:43.827] [UPnP Thread] Started

[19:16:43.827] [Position Thread] Started

[19:16:43.827] [DirettaRenderer] Started

[19:16:43.827] Renderer started!

[19:16:43.827] [Audio Thread] Started

[19:16:43.827] Waiting for UPnP control points...

[19:16:43.827] (Press Ctrl+C to stop)

[19:15:37.720] Available Diretta Targets (2 found):

[19:15:37.720] [1] TargetApp_EC9C

[19:15:37.720]    Output: FOSTEX USB AUDIO HP-A8

[19:15:37.720]    Port: IN=0 OUT=1 (multiport)

[19:15:37.720]    Version: 1

[19:15:37.720]    ProductID: 0x72506f6f746e6547

[19:15:37.720] [2] TargetApp_EC9C

[19:15:37.720]    Output: snd_allo_digione

[19:15:37.720]    Port: IN=0 OUT=2 (multiport)

[19:15:37.720]    Version: 1

[19:15:37.720]    ProductID: 0x72506f6f746e6547