Les informations qui arrivent sont intègres, le souci n’a jamais été là en effet. Le souci serait dans le bruit de phase issu du réseau arrivant avec les données , qui vient perturber le fonctionnement des circuits numériques du dac, et là ce peut etre du jitter dans la conversion numérique analogique. Ajoutons à cela la connexion des masses des appareils par le blindage entre switch et appareil audio, et nous avons les deux sources de bruit pour la source audio à priori.
Bref fichiers, flux de données, peu importe, les données ne sont pas en cause qu’elles viennent d’une carte mémoire, d’un disque dur local ou réseau, ou des serveurs de qobuz, ce qui différe c’est le bruit de phase accompagnant ce flux de données. C’est ce qui ressort des travaux de Swenson ou des itérations de sWitchs audiophiles juste modifiés ou plus conçus from scratch.
Un premier retour intéressant de Hong Kong sur What’s best forum sur l’etherRegen:
First Uptone Ether Regen feedback from Hong Kong:
I just received my Uptone Ether Regen. It’s quite amazing. I swapped out my modified switch and tried the ER using (A) fibre optic output (Startech) to SGM. This was already better straight out of the box (quieter and better defined bass were immediate impressions). I then used the recommended (B) copper Ethernet output to SGM. Quieter still and better throughout the spectrum. Biggest improvement was clearer separation of instruments and soundstage. I could also hear instruments that used to come straight out of speakers to being positioned behind speakers to create better layering. I then wanted to try and connect from my router to my modified switch > ER (Fibre optic to (A)) > copper Ethernet to SGM. That test will have to wait.
I also tried the SOTM about two months ago. I tried single SOTM and stacked. Single ER definitely better than single but I can’t say single ER better than two stacked SOTM. They were different. I suspect stacking two ER will beat two SOTM.
Previous feedback on the SOTM:
Hi Emile - I went to the HK sotm dealer to try their SOtM sNH-10G Switch and A/B tested with my modified Switch. Their system used a sotm server. The SOtM Switch was quieter than my switch, and music was smoother, more detailed. Upon adding a second SOtM Switch (which they connected together using SOtM ethernet), the improvement was even more pronounced with instruments and vocals. I then had the SOtM switches in my home system and interestingly the improvement delta was much less. I suspect due to the isolation and other areas of optimisation in the Extreme.
A noter que la personne en question utilise pourtant un serveur Taiko Audio à 25000€ (Le SGM Extreme), ce qui replace de nouveau l’église au milieu du village sur la capacité de perfection d’un serveur audiophile de très haut niveau à dealer avec les perturbations réseau, pour ceux qui imaginent que le haut de gamme sait résoudre complètement cette équation comportant une inconnue de trop.
Le gars avait sérieusement testé deux switch sotm en série en magasin et chez lui, qui seraient proches de ce que l’etherRegen fait seul, sinon l’etherRegen semble validé comme clairement au dessus d’un switch sotm. Par contre il mentionne bien ci dessus que l’effet des switch sotm chez lui était plus limité avec son serveur Taiko qu’en magasin sur serveur sotm, montrant l’apport d’un bon serveur.
Cordialement, Nico.
Bref fichiers, flux de données, peu importe, les données ne sont pas en cause qu’elles viennent d’une carte mémoire, d’un disque dur local ou réseau, ou des serveurs de qobuz, ce qui différe c’est le bruit de phase accompagnant ce flux de données. C’est ce qui ressort des travaux de Swenson ou des itérations de sWitchs audiophiles juste modifiés ou plus conçus from scratch.
Un premier retour intéressant de Hong Kong sur What’s best forum sur l’etherRegen:
First Uptone Ether Regen feedback from Hong Kong:
I just received my Uptone Ether Regen. It’s quite amazing. I swapped out my modified switch and tried the ER using (A) fibre optic output (Startech) to SGM. This was already better straight out of the box (quieter and better defined bass were immediate impressions). I then used the recommended (B) copper Ethernet output to SGM. Quieter still and better throughout the spectrum. Biggest improvement was clearer separation of instruments and soundstage. I could also hear instruments that used to come straight out of speakers to being positioned behind speakers to create better layering. I then wanted to try and connect from my router to my modified switch > ER (Fibre optic to (A)) > copper Ethernet to SGM. That test will have to wait.
I also tried the SOTM about two months ago. I tried single SOTM and stacked. Single ER definitely better than single but I can’t say single ER better than two stacked SOTM. They were different. I suspect stacking two ER will beat two SOTM.
Previous feedback on the SOTM:
Hi Emile - I went to the HK sotm dealer to try their SOtM sNH-10G Switch and A/B tested with my modified Switch. Their system used a sotm server. The SOtM Switch was quieter than my switch, and music was smoother, more detailed. Upon adding a second SOtM Switch (which they connected together using SOtM ethernet), the improvement was even more pronounced with instruments and vocals. I then had the SOtM switches in my home system and interestingly the improvement delta was much less. I suspect due to the isolation and other areas of optimisation in the Extreme.
A noter que la personne en question utilise pourtant un serveur Taiko Audio à 25000€ (Le SGM Extreme), ce qui replace de nouveau l’église au milieu du village sur la capacité de perfection d’un serveur audiophile de très haut niveau à dealer avec les perturbations réseau, pour ceux qui imaginent que le haut de gamme sait résoudre complètement cette équation comportant une inconnue de trop.
Le gars avait sérieusement testé deux switch sotm en série en magasin et chez lui, qui seraient proches de ce que l’etherRegen fait seul, sinon l’etherRegen semble validé comme clairement au dessus d’un switch sotm. Par contre il mentionne bien ci dessus que l’effet des switch sotm chez lui était plus limité avec son serveur Taiko qu’en magasin sur serveur sotm, montrant l’apport d’un bon serveur.
Cordialement, Nico.
Du transistor, du tube, de l’hybride…. Des petites, des grosses…. Tout démat.
Ventes à venir ou en cours (MP si intéressé pour en discuter): panneaux acoustiques GIK, Modulation RCA 1877Phono Silverdart, Cables HP Coincident Statement bicablage 3m, Enceintes Scanspeak Maxima, Ayon Odin, Kinki EX-M7
Ventes à venir ou en cours (MP si intéressé pour en discuter): panneaux acoustiques GIK, Modulation RCA 1877Phono Silverdart, Cables HP Coincident Statement bicablage 3m, Enceintes Scanspeak Maxima, Ayon Odin, Kinki EX-M7