04-26-2024, 05:43 PM
J ai trouve les reponses sur internet et un papier de 1978
Impedance d entree du REVOX B77, sur le sortie REC de mon pre Ampli at 6V a 10KOhm
La il faut s aligner sur les niveaux d entree avec le reglage sur le B77
The input level of the B77 tape machine must be set accordingly to the input level potentiometers.
Pour la sortie casque, meme si en dessous de 200 Ohms cela fonctionne le volume sera juste fort
The line outputs averaged 1.48V, just a little less than the spec. The headphone output was 5.5V open circuit, 2.75V with a matching 220ohm load. Although the manufacturer recommends headphones with impedances from 200 to 600 ohms, the circuit will deliver a very adequate 190mV to 8ohm loads. (Many so-called 8ohm headphones are actually 100 ohms or so.)
Impedance d entree du REVOX B77, sur le sortie REC de mon pre Ampli at 6V a 10KOhm
La il faut s aligner sur les niveaux d entree avec le reglage sur le B77
The input level of the B77 tape machine must be set accordingly to the input level potentiometers.
Pour la sortie casque, meme si en dessous de 200 Ohms cela fonctionne le volume sera juste fort
The line outputs averaged 1.48V, just a little less than the spec. The headphone output was 5.5V open circuit, 2.75V with a matching 220ohm load. Although the manufacturer recommends headphones with impedances from 200 to 600 ohms, the circuit will deliver a very adequate 190mV to 8ohm loads. (Many so-called 8ohm headphones are actually 100 ohms or so.)
"Il faut avoir une grande musique en soi si l'on veut faire danser la vie." Friedrich Nietzsche “